bump frontend

sparql endpoint only on dev/acc environment

README.md

@@ -12,14 +12,3 @@ Backend for the Contact Hub application based on the  mu.semte.ch microservices
 You can shut down using `docker-compose stop` and remove everything using `docker-compose rm`.
 
 
-## Add username/password for Basic Auth
-
-By default, there are two accounts you can use to log-in using basic auth:
-
-- root/root
-- contacthub/contacthub
-
-To add new accounts, execute the following command, then add the result to `./config/proxy/nginx.htpasswd`
-
-`docker run --rm --entrypoint htpasswd registry:2.7.0 -bn username password`
-

config/db/virtuoso-production.ini

@@ -0,0 +1,253 @@
+;
+;  virtuoso.ini
+;
+;  Configuration file for the OpenLink Virtuoso VDBMS Server
+;
+;  To learn more about this product, or any other product in our
+;  portfolio, please check out our web site at:
+;
+;      http://virtuoso.openlinksw.com/
+;
+;  or contact us at:
+;
+;      general.information@openlinksw.com
+;
+;  If you have any technical questions, please contact our support
+;  staff at:
+;
+;      technical.support@openlinksw.com
+;
+;
+;  Database setup
+;
+[Database]
+DatabaseFile       = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.db
+ErrorLogFile       = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.log
+LockFile           = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.lck
+TransactionFile    = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.trx
+xa_persistent_file = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.pxa
+ErrorLogLevel      = 7
+FileExtend         = 200
+MaxCheckpointRemap = 17000 ;;niels 1/4 of the number of buffers (assuming db uses most of the available buffers, you can check with `status()` in isql-v
+Striping           = 0
+TempStorage        = TempDatabase
+Syslog             = 1	; write to syslog in case of failures where writing to log is not possible
+
+[TempDatabase]
+DatabaseFile       = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso-temp.db
+TransactionFile    = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso-temp.trx
+MaxCheckpointRemap = 2000
+Striping           = 0
+
+;
+;  Server parameters
+;
+[Parameters]
+ServerPort                 = 1111
+LiteMode                   = 0
+DisableUnixSocket          = 1
+DisableTcpSocket           = 0
+;SSLServerPort			= 2111
+;SSLCertificate			= cert.pem
+;SSLPrivateKey			= pk.pem
+;X509ClientVerify		= 0
+;X509ClientVerifyDepth		= 0
+;X509ClientVerifyCAFile		= ca.pem
+MaxClientConnections       = 10
+CheckpointInterval         = 60
+TraceOn                    = errors	; write traces
+O_DIRECT                   = 0
+CaseMode                   = 2
+MaxStaticCursorRows        = 5000
+CheckpointAuditTrail       = 0
+AllowOSCalls               = 0
+SchedulerInterval          = 10
+DirsAllowed                = ., /usr/local/virtuoso-opensource/share/virtuoso/vad
+ThreadCleanupInterval      = 10
+ThreadThreshold            = 10
+ResourcesCleanupInterval   = 10
+FreeTextBatchSize          = 100000
+SingleCPU                  = 0
+VADInstallDir              = /usr/local/virtuoso-opensource/share/virtuoso/vad/
+PrefixResultNames          = 0
+RdfFreeTextRulesSize       = 100
+IndexTreeMaps              = 256
+MaxMemPoolSize             = 200000000
+PrefixResultNames          = 0
+MacSpotlight               = 0
+MaxQueryMem                = 4G	; memory allocated to query processor ;;Niels said to 4g
+VectorSize                 = 1000	; initial parallel query vector (array of query operations) size
+MaxVectorSize              = 1000000	; query vector size threshold.
+AdjustVectorSize           = 0
+ThreadsPerQuery            = 4
+AsyncQueueMaxThreads       = 10
+TransactionAfterImageLimit = 150000000	; max 150MB transaction, total transient consumption is 450MB (roll forward + roll back)
+;;
+;; When running with large data sets, one should configure the Virtuoso
+;; process to use between 2/3 to 3/5 of free system memory and to stripe
+;; storage on all available disks.
+;;
+;; Uncomment next two lines if there is 2 GB system memory free
+;;NumberOfBuffers            = 170000
+;;MaxDirtyBuffers            = 130000
+
+;; Uncomment next two lines if there is 4 GB system memory free
+;;NumberOfBuffers          = 340000
+;;MaxDirtyBuffers          = 250000
+;; Uncomment next two lines if there is 8 GB system memory free
+NumberOfBuffers          = 680000
+MaxDirtyBuffers          = 500000
+;; Uncomment next two lines if there is 16 GB system memory free
+;NumberOfBuffers          = 1360000
+;MaxDirtyBuffers          = 1000000
+;; Uncomment next two lines if there is 32 GB system memory free
+;NumberOfBuffers          = 2720000
+;MaxDirtyBuffers          = 2000000
+;; Uncomment next two lines if there is 48 GB system memory free
+;NumberOfBuffers          = 4000000
+;MaxDirtyBuffers          = 3000000
+;; Uncomment next two lines if there is 64 GB system memory free
+;NumberOfBuffers          = 5450000
+;MaxDirtyBuffers          = 4000000
+;;
+;; Note the default settings will take very little memory
+;; but will not result in very good performance
+;;
+;NumberOfBuffers          = 10000
+;MaxDirtyBuffers          = 6000
+
+;; Introduced after bug with export service
+MaxSortedTopRows = 1000000 ; 1 million!
+
+[HTTPServer]
+ServerPort                  = 8890
+ServerRoot                  = /usr/local/virtuoso-opensource/var/lib/virtuoso/vsp
+MaxClientConnections        = 10
+DavRoot                     = DAV
+EnabledDavVSP               = 0
+HTTPProxyEnabled            = 0
+TempASPXDir                 = 0
+DefaultMailServer           = localhost:25
+ServerThreads               = 10
+MaxKeepAlives               = 10
+KeepAliveTimeout            = 10
+MaxCachedProxyConnections   = 10
+ProxyConnectionCacheTimeout = 15
+HTTPThreadSize              = 280000
+HttpPrintWarningsInOutput   = 0
+Charset                     = UTF-8
+;;HTTPLogFile             = http.log
+MaintenancePage             = atomic.html
+EnabledGzipContent          = 1
+
+[AutoRepair]
+BadParentLinks = 0
+
+[Client]
+SQL_PREFETCH_ROWS  = 100
+SQL_PREFETCH_BYTES = 16000
+SQL_QUERY_TIMEOUT  = 0
+SQL_TXN_TIMEOUT    = 0
+;SQL_NO_CHAR_C_ESCAPE		= 1
+;SQL_UTF8_EXECS			= 0
+;SQL_NO_SYSTEM_TABLES		= 0
+;SQL_BINARY_TIMESTAMP		= 1
+;SQL_ENCRYPTION_ON_PASSWORD	= -1
+
+[VDB]
+ArrayOptimization           = 0
+NumArrayParameters          = 10
+VDBDisconnectTimeout        = 1000
+KeepConnectionOnFixedThread = 0
+
+[Replication]
+ServerName   = db-D602566B774E
+ServerEnable = 1
+QueueMax     = 50000
+
+;
+;  Striping setup
+;
+;  These parameters have only effect when Striping is set to 1 in the
+;  [Database] section, in which case the DatabaseFile parameter is ignored.
+;
+;  With striping, the database is spawned across multiple segments
+;  where each segment can have multiple stripes.
+;
+;  Format of the lines below:
+;    Segment<number> = <size>, <stripe file name> [, <stripe file name> .. ]
+;
+;  <number> must be ordered from 1 up.
+;
+;  The <size> is the total size of the segment which is equally divided
+;  across all stripes forming  the segment. Its specification can be in
+;  gigabytes (g), megabytes (m), kilobytes (k) or in database blocks
+;  (b, the default)
+;
+;  Note that the segment size must be a multiple of the database page size
+;  which is currently 8k. Also, the segment size must be divisible by the
+;  number of stripe files forming  the segment.
+;
+;  The example below creates a 200 meg database striped on two segments
+;  with two stripes of 50 meg and one of 100 meg.
+;
+;  You can always add more segments to the configuration, but once
+;  added, do not change the setup.
+;
+[Striping]
+Segment1 = 100M, db-seg1-1.db, db-seg1-2.db
+Segment2 = 100M, db-seg2-1.db
+;...
+;[TempStriping]
+;Segment1			= 100M, db-seg1-1.db, db-seg1-2.db
+;Segment2			= 100M, db-seg2-1.db
+;...
+;[Ucms]
+;UcmPath			= <path>
+;Ucm1				= <file>
+;Ucm2				= <file>
+;...
+
+[Zero Config]
+ServerName = virtuoso (D602566B774E)
+;ServerDSN			= ZDSN
+;SSLServerName			=
+;SSLServerDSN			=
+
+[Mono]
+;MONO_TRACE			= Off
+;MONO_PATH			= <path_here>
+;MONO_ROOT			= <path_here>
+;MONO_CFG_DIR			= <path_here>
+;virtclr.dll			=
+
+[URIQA]
+DynamicLocal = 0
+DefaultHost  = localhost:8890
+
+[SPARQL]
+;ExternalQuerySource		= 1
+;ExternalXsltSource     = 1
+;DefaultGraph           = http://localhost:8890/dataspace
+;ImmutableGraphs        = http://localhost:8890/dataspace
+ResultSetMaxRows           = 1000000 ; 1 million
+;MaxQueryCostEstimationTime = 4000	; in seconds
+MaxQueryExecutionTime      = 1200	; in seconds
+DefaultQuery               = select distinct ?Concept where {[] a ?Concept} LIMIT 100
+DeferInferenceRulesInit    = 0	; controls inference rules loading
+;PingService            = http://rpc.pingthesemanticweb.com/
+
+[Plugins]
+LoadPath = /usr/local/virtuoso-opensource/lib/virtuoso/hosting
+;Load1				= plain, wikiv
+;Load2				= plain, mediawiki
+;Load3				= plain, creolewiki
+;Load4			= plain, im
+;Load5		= plain, wbxml2
+;Load6			= plain, hslookup
+;Load7			= attach, libphp5.so
+;Load8			= Hosting, hosting_php.so
+;Load9			= Hosting,hosting_perl.so
+;Load10		= Hosting,hosting_python.so
+;Load11		= Hosting,hosting_ruby.so
+;Load12				= msdtc,msdtc_sample

config/db/virtuoso.ini

@@ -17,85 +17,83 @@
 ;
 ;      technical.support@openlinksw.com
 ;
-
 ;
 ;  Database setup
 ;
 [Database]
-DatabaseFile			= /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.db
-ErrorLogFile			= /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.log
-LockFile			= /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.lck
-TransactionFile			= /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.trx
-xa_persistent_file		= /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.pxa
-ErrorLogLevel			= 7
-FileExtend			= 200
-MaxCheckpointRemap		= 2000
-Striping			= 0
-TempStorage			= TempDatabase
-
+DatabaseFile       = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.db
+ErrorLogFile       = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.log
+LockFile           = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.lck
+TransactionFile    = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.trx
+xa_persistent_file = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso.pxa
+ErrorLogLevel      = 7
+FileExtend         = 200
+MaxCheckpointRemap = 8500 ;;niels 1/4 of the number of buffers (assuming db uses most of the available buffers, you can check with `status()` in isql-v
+Striping           = 0
+TempStorage        = TempDatabase
+Syslog             = 1	; write to syslog in case of failures where writing to log is not possible
 
 [TempDatabase]
-DatabaseFile			= /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso-temp.db
-TransactionFile			= /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso-temp.trx
-MaxCheckpointRemap		= 2000
-Striping			= 0
-
+DatabaseFile       = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso-temp.db
+TransactionFile    = /usr/local/virtuoso-opensource/var/lib/virtuoso/db/virtuoso-temp.trx
+MaxCheckpointRemap = 2000
+Striping           = 0
 
 ;
 ;  Server parameters
 ;
 [Parameters]
-ServerPort			= 1111
-LiteMode			= 0
-DisableUnixSocket		= 1
-DisableTcpSocket		= 0
+ServerPort                 = 1111
+LiteMode                   = 0
+DisableUnixSocket          = 1
+DisableTcpSocket           = 0
 ;SSLServerPort			= 2111
 ;SSLCertificate			= cert.pem
 ;SSLPrivateKey			= pk.pem
 ;X509ClientVerify		= 0
 ;X509ClientVerifyDepth		= 0
 ;X509ClientVerifyCAFile		= ca.pem
-MaxClientConnections		= 10
-CheckpointInterval		= 60
-O_DIRECT			= 0
-TraceOn       = errors ; log errors
+MaxClientConnections       = 10
+CheckpointInterval         = 60
+TraceOn                    = errors	; write traces
+O_DIRECT                   = 0
+CaseMode                   = 2
+MaxStaticCursorRows        = 5000
+CheckpointAuditTrail       = 0
+AllowOSCalls               = 0
+SchedulerInterval          = 10
+DirsAllowed                = ., /usr/local/virtuoso-opensource/share/virtuoso/vad
+ThreadCleanupInterval      = 10
+ThreadThreshold            = 10
+ResourcesCleanupInterval   = 10
+FreeTextBatchSize          = 100000
+SingleCPU                  = 0
+VADInstallDir              = /usr/local/virtuoso-opensource/share/virtuoso/vad/
+PrefixResultNames          = 0
+RdfFreeTextRulesSize       = 100
+IndexTreeMaps              = 256
+MaxMemPoolSize             = 200000000
+PrefixResultNames          = 0
+MacSpotlight               = 0
+MaxQueryMem                = 2G
+VectorSize                 = 1000	; initial parallel query vector (array of query operations) size
+MaxVectorSize              = 1000000	; query vector size threshold.
+AdjustVectorSize           = 0
+ThreadsPerQuery            = 4
+AsyncQueueMaxThreads       = 10
 TransactionAfterImageLimit = 150000000	; max 150MB transaction, total transient consumption is 450MB (roll forward + roll back)
-CaseMode			= 2
-MaxStaticCursorRows		= 5000
-CheckpointAuditTrail		= 0
-AllowOSCalls			= 0
-SchedulerInterval		= 10
-DirsAllowed			= ., /usr/local/virtuoso-opensource/share/virtuoso/vad
-ThreadCleanupInterval		= 10
-ThreadThreshold			= 10
-ResourcesCleanupInterval	= 10
-FreeTextBatchSize		= 100000
-SingleCPU			= 0
-VADInstallDir			= /usr/local/virtuoso-opensource/share/virtuoso/vad/
-PrefixResultNames               = 0
-RdfFreeTextRulesSize		= 100
-IndexTreeMaps			= 256
-MaxMemPoolSize                  = 200000000
-PrefixResultNames               = 0
-MacSpotlight                    = 0
-IndexTreeMaps                   = 64
-MaxQueryMem 		 	= 2G		; memory allocated to query processor
-VectorSize 		 	= 1000		; initial parallel query vector (array of query operations) size
-MaxVectorSize 		 	= 1000000	; query vector size threshold.
-AdjustVectorSize 	 	= 1
-ThreadsPerQuery 	 	= 4
-AsyncQueueMaxThreads 	 	= 10
 ;;
 ;; When running with large data sets, one should configure the Virtuoso
 ;; process to use between 2/3 to 3/5 of free system memory and to stripe
 ;; storage on all available disks.
 ;;
 ;; Uncomment next two lines if there is 2 GB system memory free
-NumberOfBuffers          = 170000
-MaxDirtyBuffers          = 130000
+;;NumberOfBuffers            = 170000
+;;MaxDirtyBuffers            = 130000
+
 ;; Uncomment next two lines if there is 4 GB system memory free
-;NumberOfBuffers          = 340000
-; MaxDirtyBuffers          = 250000
+NumberOfBuffers          = 340000
+MaxDirtyBuffers          = 250000
 ;; Uncomment next two lines if there is 8 GB system memory free
 ;NumberOfBuffers          = 680000
 ;MaxDirtyBuffers          = 500000
@@ -111,38 +109,45 @@ MaxDirtyBuffers          = 130000
 ;; Uncomment next two lines if there is 64 GB system memory free
 ;NumberOfBuffers          = 5450000
 ;MaxDirtyBuffers          = 4000000
+;;
+;; Note the default settings will take very little memory
+;; but will not result in very good performance
+;;
+;NumberOfBuffers          = 10000
+;MaxDirtyBuffers          = 6000
 
+;; Introduced after bug with export service
+MaxSortedTopRows = 1000000 ; 1 million!
 
 [HTTPServer]
-ServerPort			= 8890
-ServerRoot			= /usr/local/virtuoso-opensource/var/lib/virtuoso/vsp
-MaxClientConnections		= 10
-DavRoot				= DAV
-EnabledDavVSP			= 0
-HTTPProxyEnabled		= 0
-TempASPXDir			= 0
-DefaultMailServer		= localhost:25
-ServerThreads			= 10
-MaxKeepAlives			= 10
-KeepAliveTimeout		= 10
-MaxCachedProxyConnections	= 10
-ProxyConnectionCacheTimeout	= 15
-HTTPThreadSize			= 280000
-HttpPrintWarningsInOutput	= 0
-Charset				= UTF-8
-;;HTTPLogFile		        = http.log
-MaintenancePage             	= atomic.html
-EnabledGzipContent          	= 1
-
+ServerPort                  = 8890
+ServerRoot                  = /usr/local/virtuoso-opensource/var/lib/virtuoso/vsp
+MaxClientConnections        = 10
+DavRoot                     = DAV
+EnabledDavVSP               = 0
+HTTPProxyEnabled            = 0
+TempASPXDir                 = 0
+DefaultMailServer           = localhost:25
+ServerThreads               = 10
+MaxKeepAlives               = 10
+KeepAliveTimeout            = 10
+MaxCachedProxyConnections   = 10
+ProxyConnectionCacheTimeout = 15
+HTTPThreadSize              = 280000
+HttpPrintWarningsInOutput   = 0
+Charset                     = UTF-8
+;;HTTPLogFile             = http.log
+MaintenancePage             = atomic.html
+EnabledGzipContent          = 1
 
 [AutoRepair]
-BadParentLinks			= 0
+BadParentLinks = 0
 
 [Client]
-SQL_PREFETCH_ROWS		= 100
-SQL_PREFETCH_BYTES		= 16000
-SQL_QUERY_TIMEOUT		= 0
-SQL_TXN_TIMEOUT			= 0
+SQL_PREFETCH_ROWS  = 100
+SQL_PREFETCH_BYTES = 16000
+SQL_QUERY_TIMEOUT  = 0
+SQL_TXN_TIMEOUT    = 0
 ;SQL_NO_CHAR_C_ESCAPE		= 1
 ;SQL_UTF8_EXECS			= 0
 ;SQL_NO_SYSTEM_TABLES		= 0
@@ -150,16 +155,15 @@ SQL_TXN_TIMEOUT			= 0
 ;SQL_ENCRYPTION_ON_PASSWORD	= -1
 
 [VDB]
-ArrayOptimization		= 0
-NumArrayParameters		= 10
-VDBDisconnectTimeout		= 1000
-KeepConnectionOnFixedThread	= 0
+ArrayOptimization           = 0
+NumArrayParameters          = 10
+VDBDisconnectTimeout        = 1000
+KeepConnectionOnFixedThread = 0
 
 [Replication]
-ServerName			= db-D602566B774E
-ServerEnable			= 1
-QueueMax			= 50000
-
+ServerName   = db-D602566B774E
+ServerEnable = 1
+QueueMax     = 50000
 
 ;
 ;  Striping setup
@@ -191,28 +195,24 @@ QueueMax			= 50000
 ;  added, do not change the setup.
 ;
 [Striping]
-Segment1			= 100M, db-seg1-1.db, db-seg1-2.db
-Segment2			= 100M, db-seg2-1.db
+Segment1 = 100M, db-seg1-1.db, db-seg1-2.db
+Segment2 = 100M, db-seg2-1.db
 ;...
-
 ;[TempStriping]
 ;Segment1			= 100M, db-seg1-1.db, db-seg1-2.db
 ;Segment2			= 100M, db-seg2-1.db
 ;...
-
 ;[Ucms]
 ;UcmPath			= <path>
 ;Ucm1				= <file>
 ;Ucm2				= <file>
 ;...
 
-
 [Zero Config]
-ServerName			= virtuoso (D602566B774E)
+ServerName = virtuoso (D602566B774E)
 ;ServerDSN			= ZDSN
-;SSLServerName			= 
-;SSLServerDSN			= 
-
+;SSLServerName			=
+;SSLServerDSN			=
 
 [Mono]
 ;MONO_TRACE			= Off
@@ -221,31 +221,28 @@ ServerName			= virtuoso (D602566B774E)
 ;MONO_CFG_DIR			= <path_here>
 ;virtclr.dll			=
 
-
 [URIQA]
-DynamicLocal			= 0
-DefaultHost			= localhost:8890
-
+DynamicLocal = 0
+DefaultHost  = localhost:8890
 
 [SPARQL]
 ;ExternalQuerySource		= 1
-;ExternalXsltSource 		= 1
-;DefaultGraph      		= http://localhost:8890/dataspace
-;ImmutableGraphs    		= http://localhost:8890/dataspace
-ResultSetMaxRows           	= 10000
-MaxQueryCostEstimationTime 	= 400	; in seconds
-MaxQueryExecutionTime      	= 60	; in seconds
-DefaultQuery               	= select distinct ?Concept where {[] a ?Concept} LIMIT 100
-DeferInferenceRulesInit    	= 0  ; controls inference rules loading
-;PingService       		= http://rpc.pingthesemanticweb.com/
-
+;ExternalXsltSource     = 1
+;DefaultGraph           = http://localhost:8890/dataspace
+;ImmutableGraphs        = http://localhost:8890/dataspace
+ResultSetMaxRows           = 1000000 ; 1 million
+;MaxQueryCostEstimationTime = 4000	; in seconds
+MaxQueryExecutionTime      = 1200	; in seconds
+DefaultQuery               = select distinct ?Concept where {[] a ?Concept} LIMIT 100
+DeferInferenceRulesInit    = 0	; controls inference rules loading
+;PingService            = http://rpc.pingthesemanticweb.com/
 
 [Plugins]
-LoadPath			= /usr/local/virtuoso-opensource/lib/virtuoso/hosting
+LoadPath = /usr/local/virtuoso-opensource/lib/virtuoso/hosting
 ;Load1				= plain, wikiv
 ;Load2				= plain, mediawiki
 ;Load3				= plain, creolewiki
-;Load4			= plain, im 
+;Load4			= plain, im
 ;Load5		= plain, wbxml2
 ;Load6			= plain, hslookup
 ;Load7			= attach, libphp5.so
@@ -253,4 +250,4 @@ LoadPath			= /usr/local/virtuoso-opensource/lib/virtuoso/hosting
 ;Load9			= Hosting,hosting_perl.so
 ;Load10		= Hosting,hosting_python.so
 ;Load11		= Hosting,hosting_ruby.so
-;Load12				= msdtc,msdtc_sample
+;Load12				= msdtc,msdtc_sample

config/delta/rules.js

@@ -1,7 +1,9 @@
 export default [
     {
       match: {
-        subject: {
+        graph: {
+          type: "uri",
+          value: "http://mu.semte.ch/graphs/contacthub/141d9d6b-54af-4d17-b313-8d1c30bc3f5b/ChAdmin"
         }
       },
       callback: {

config/dispatcher/dispatcher.ex

@@ -5,6 +5,7 @@ defmodule Dispatcher do
     html: ["text/html", "application/xhtml+html"],
     json: ["application/json", "application/vnd.api+json"],
     upload: ["multipart/form-data"],
+    sparql_json: ["application/sparql-results+json"],
     any: [ "*/*" ],
   ]
 
@@ -147,10 +148,6 @@ defmodule Dispatcher do
     Proxy.forward conn, path, "http://cache/minister-conditions/"
   end 
 
-  match "/associated-legal-structures/*path", %{ accept: [:json], layer: :api} do
-    Proxy.forward conn, path, "http://cache/associated-legal-structures/"
-  end 
-
   match "/dates-of-birth/*path", %{ accept: [:json], layer: :api} do
     Proxy.forward conn, path, "http://cache/dates-of-birth/"
   end   
@@ -162,6 +159,9 @@ defmodule Dispatcher do
   match "/gender-codes/*path", %{ accept: [:json], layer: :api} do
     Proxy.forward conn, path, "http://cache/gender-codes/"
   end
+  match "/concepts/*path", %{ accept: [:json], layer: :api} do
+    Proxy.forward conn, path, "http://cache/concepts/"
+  end
 
   match "/minister-positions/*path", %{ accept: [:json], layer: :api} do
     Proxy.forward conn, path, "http://cache/minister-positions/"
@@ -179,10 +179,6 @@ defmodule Dispatcher do
     Proxy.forward conn, path, "http://cache/minister-condition-criterions/"
   end
 
-  match "/legal-form-types/*path", %{ accept: [:json], layer: :api} do
-    Proxy.forward conn, path, "http://cache/legal-form-types/"
-  end
-
   match "/document-types-criterions/*path", %{ accept: [:json], layer: :api} do
     Proxy.forward conn, path, "http://cache/document-types-criterions/"
   end  
@@ -272,6 +268,13 @@ defmodule Dispatcher do
     Proxy.forward conn, [], "http://frontend/index.html"
   end
   
+  ###############################################################
+  # sparql endpoint
+  ###############################################################
+  
+  post "/sparql/*path", %{ layer: :api_services, host: "*.abb.lblod.info", accept: %{ sparql_json: true } } do
+    forward conn, path, "http://db:8890/sparql/"
+  end
 
   ###############################################################
   # errors

config/migrations/2021110315263111111111111111-source-crab.sparql

@@ -0,0 +1,13 @@
+INSERT DATA {
+  GRAPH <http://mu.semte.ch/graphs/contacthub/141d9d6b-54af-4d17-b313-8d1c30bc3f5b/ChAdmin> {
+    <http://lblod.data.gift/concept-schemes/6f6f95d3-94e1-48a7-99ec-cdff57e6752d> a <http://www.w3.org/2004/02/skos/core#ConceptScheme>;    
+    <http://www.w3.org/2004/02/skos/core#prefLabel> "Data sources"@en, "Databronnen"@nl .
+    <http://lblod.data.gift/concepts/e59c97a9-4e95-4d65-9696-756de47fbc1f>  a <http://www.w3.org/2004/02/skos/core#Concept>;  
+    <http://www.w3.org/2004/02/skos/core#inScheme> <http://lblod.data.gift/concept-schemes/6f6f95d3-94e1-48a7-99ec-cdff57e6752d>;  
+    <http://www.w3.org/2004/02/skos/core#topConceptOf><http://lblod.data.gift/concept-schemes/6f6f95d3-94e1-48a7-99ec-cdff57e6752d>;  
+    <http://mu.semte.ch/vocabularies/core/uuid> "e59c97a9-4e95-4d65-9696-756de47fbc1f";  
+    <http://www.w3.org/2004/02/skos/core#prefLabel> "Centraal Referentieadressenbestand (CRAB)";  
+    <http://www.w3.org/2004/02/skos/core#altLabel> "CRAB".
+  }
+}
+

config/resources/domain.json

@@ -429,11 +429,6 @@
           "cardinality": "many",
           "inverse": true
         },
-        "associated-structures": {
-          "predicate": "ere:heeftVerbondenEntiteit",
-          "target": "associated-legal-structures",
-          "cardinality": "many"
-        },
         "minister-positions": {
           "predicate": "ere:wordtBediendDoor",
           "target": "minister-positions",
@@ -616,6 +611,18 @@
         "full-address": {
           "type": "string",
           "predicate": "locn:fullAddress"
+        },
+        "address-register-uri": {
+          "type": "url",
+          "predicate": "adres:verwijstNaar"
+        }
+
+      },
+      "relationships": {
+        "source": {
+          "predicate": "dct:source",
+          "target": "concepts",
+          "cardinality": "one"
         }
       },
       "new-resource-base": "http://data.lblod.info/id/adressen/"
@@ -684,6 +691,20 @@
       },
       "new-resource-base": "http://lblod.data.gift/concepts/"
     },
+    "concepts": {
+      "class": "skos:Concept",
+      "attributes": {
+        "label": {
+          "type": "string",
+          "predicate": "skos:prefLabel"
+        },
+        "alt-label": {
+          "type": "string",
+          "predicate": "skos:altLabel"
+        }
+      },
+      "new-resource-base": "http://lblod.data.gift/concepts/"
+    },
     "organization-status-codes": {
       "class": "code:OrganisatieStatusCode",
       "attributes": {
@@ -771,33 +792,6 @@
       },
       "new-resource-base": "http://data.lblod.info/id/voorwaardenBedienaar/"
     },
-    "associated-legal-structures": {
-      "class": "ere:VerbondenJuridischeStructuren",
-      "attributes": {
-        "name": {
-          "type": "string",
-          "predicate": "skos:prefLabel"
-        }
-      },
-      "relationships": {
-        "registration": {
-          "predicate": "regorg:registration",
-          "target": "identifiers",
-          "cardinality": "one"
-        },
-        "legal-type": {
-          "predicate": "organisatie:rechtsvorm",
-          "target": "legal-form-types",
-          "cardinality": "one"
-        },
-        "address": {
-          "predicate": "locn:address",
-          "target": "addresses",
-          "cardinality": "one"
-        }
-      },
-      "new-resource-base": "http://data.lblod.info/id/verbondenJuridischeStructuren/"
-    },
     "dates-of-birth": {
       "class": "persoon:Geboorte",
       "attributes": {
@@ -891,16 +885,6 @@
       },
       "new-resource-base": "http://lblod.data.gift/concepts/"
     },
-    "legal-form-types": {
-      "class": "code:Rechtsvormtype",
-      "attributes": {
-        "label": {
-          "type": "string",
-          "predicate": "skos:prefLabel"
-        }
-      },
-      "new-resource-base": "http://lblod.data.gift/concepts/"
-    },
     "document-types-criterions": {
       "class": "code:BedienaarCriteriumBewijsstuk",
       "attributes": {

docker-compose.dev.yml

@@ -22,7 +22,7 @@ services:
   kalliope-api:
     environment:
       SPRING_SECURITY_CONFIG: "/config/security-dev.yml"
-      restart: "no"
+    restart: "no"
   deltanotifier:
     restart: "no"
   mocklogin:
@@ -33,7 +33,14 @@ services:
     restart: "no"
   login:
     restart: "no"
+  accountdetail:
+    restart: "no"
+  privacy:
+    restart: "no"
+  adressenregister:
+    restart: "no"
   frontend:
+    image: lblod/frontend-contact-hub:latest
     restart: "no"
   uri-info:
     restart: "no"

docker-compose.yml

@@ -116,7 +116,7 @@ services:
       MU_APPLICATION_AUTH_DISCOVERY_URL: "https://authenticatie-ti.vlaanderen.be/op"
       MU_APPLICATION_AUTH_CLIENT_ID: "677af572-2e2f-4e61-ad38-036723bb314c"
       MU_APPLICATION_AUTH_REDIRECT_URI: "https://organisaties.abb.lblod.info/authorization/callback"
-      MU_APPLICATION_AUTH_CLIENT_SECRET: ""
+      MU_APPLICATION_AUTH_CLIENT_SECRET: "secret"
     links:
       - db:database
     labels:
@@ -143,7 +143,7 @@ services:
       SERVER_PORT: "80"
       SPARQL_ENDPOINT: "http://db:8890/sparql"
       LOGGING_LEVEL: "INFO"
-      DEFAULT_GRAPH: "http://mu.semte.ch/graphs/contacthub/141d9d6b-54af-4d17-b313-8d1c30bc3f5b/ChAdmin"
+      DEFAULT_GRAPH: "http://mu.semte.ch/graphs/privacy-centric-graph"
       SESSION_GRAPH: "http://mu.semte.ch/graphs/sessions"
     labels:
       - "logging=true"
@@ -156,7 +156,7 @@ services:
     restart: always
     logging: *default-logging
   frontend:
-    image: lblod/frontend-contact-hub:1.1.0
+    image: lblod/frontend-contact-hub:1.2.0
     volumes:
       - ./config/frontend/add-x-frame-options-header.conf:/config/add-x-frame-options.conf
     environment: